EIM5259-4 issued: 10/17/2008 5.2-5.9 gh z multi-stage power amplifier specifications are subjec t to change without notice. excelics semiconductor, inc. 310 de guigne drive, sunnyvale, ca 94085 page 1 of 3 phone: 408-737-1711 fax: 408-737-1868 web: www.excelics.com revised october 2008 excelics rf in -5v vd1 rf out n/c vd2 gnd features ? 5.2-5.9ghz operating frequency range ? 35.5dbm output power at 1db compression ? 28.0 db typical power gain @1db gain compression ? -45.0bc typical oim3@ each tone pout 23.0dbm ? non-hermetic metal flange package applications ? point-to-point and point-to-multipoint radio ? military radar systems caution! esd sensitive device. electrical characteristics (tb = 25 c, 50 ohm, vd1=7v, vd2=10v, vgg=-5v) symbol parameter/test conditions min typ max units f operating frequency range 5.2 5.9 ghz p1db output power at 1db gain compression 34.5 35.5 dbm g1db gain @1db gain compression 24 28 db oimd3 output 3 rd order intermodulation distortion @ ? f=10mhz, each tone pout 23.0dbm -45 -42 dbc input rl input return loss -10 -8 db output rl output return loss -15 -10 db vd1 drain supply voltage 1 7 v vd2 drain supply voltage 2 10 v i dq1 quiescent drain current 1 800 ma i dq2 quiescent drain current 2 1100 ma vgg gate supply voltage -5 v rth thermal resistance 4.2 o c/w ? tch channel temperature rise 80 oc note: turn on/off sequence is required: ---to turn on: apply -5v on both vgg first, then +7v and +10v. ---to turn off: turn +7v and +10v off first, then turn -5v of f EIM5259-4
EIM5259-4 issued: 10/17/2008 5.2-5.9 gh z multi-stage power amplifier specifications are subjec t to change without notice. excelics semiconductor, inc. 310 de guigne drive, sunnyvale, ca 94085 page 2 of 3 phone: 408-737-1711 fax: 408-737-1868 web: www.excelics.com revised october 2008 maximum ratings @25c 1,2 symbol characteristic absolute continuous 1,2 v d1 drain supply voltage 1 10v 7v v d2 drain supply voltage 2 14v 10v v gg gate supply voltage -7v -5 v i gg gate current 150ma 50 ma p in input power 20dbm @ 3db compression t ch channel temperature 175c 165c t stg storage temperature -65/175c -65/175c p t total power dissipation 26w 20w notes: 1. operating the device beyond any of t he above rating may reduce mttf and cause permanent damage. 2. bias conditions mu st also satisfy the following equation vdd*idd < (t ch ?tb)/r th package dimension and pin assignment .063 .157 .177 gnd .412 .206 .920 0.060x0.060 r0.063 (4 plcs) .120 min .020 .100 .004 .669 .827 -5v rf in vd1 n/c .105 .920 .412 excelics rf out vd2 dimensions are in inches * nc: no connection inside the package EIM5259-4
EIM5259-4 issued: 10/17/2008 5.2-5.9 gh z multi-stage power amplifier specifications are subjec t to change without notice. excelics semiconductor, inc. 310 de guigne drive, sunnyvale, ca 94085 page 3 of 3 phone: 408-737-1711 fax: 408-737-1868 web: www.excelics.com revised october 2008 disclaimer excelics semiconductor reserves the right to make changes without further notice to any products herein to improve reliabil ity, function or design. excelics does not assume any liability arising ou t of the application or use of any produc t or circuit described herein. life support policy excelics semiconductor products are not authorized for use as critical components in life support devices or systems with out the express written approval of excelics semiconductor, inc. as here in: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perf orm when properly used in accordance with instructions for use provided in the labeling, can be reasonably expect ed to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support dev ice or system, or to affect its safety or effectiveness.
|
